Ball Bearings

Contact Now

A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.

The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.

Bearing Number Bore Dia Outer DIa Width Size
NSK 7940AAX DB Ball Bearings 4.3125 in Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che Labyrinth 3926904590.US
NSK BT180-2 DF Ball Bearings 1.3750 in 5820 lbf 2.8346 in 3460 lbf
NSK BA170-3 DF Ball Bearings 3.4375 in 3.4200 in 14.5000 in Non-Expansion Bearing (Fixed)
NSK BT220-3 DB Ball Bearings 3.4375 in 3.4100 in 13.5000 in Expansion Bearing (Floating)
NSK BT220-2E DB Ball Bearings 12 mm 2150 lbf 90 mm 1080 lbf
NSK B820-1A Ball Bearings 3.1875 in 3.7500 in 12.3000 in Non-Expansion Bearing (Fixed)
NSK 6056X1 Ball Bearings 50 mm Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s 75 mm 29 N/mm2;Static 150 N/mm2
NSK BA170-51 DF Ball Bearings 3/4 in -35 °F to +300 °F 1-1/8 in 50000
NSK B820-1A Ball Bearings 2.7500 in 3.7500 in 10.4375 in Expansion Bearing (Floating)
NSK BT310-51 DB Ball Bearings 60 mm 8100 lb 110 mm Uncoated
NSK BA260-1 DB Ball Bearings 30 mm 1700 kgf 83 mm 920 kgf
NSK BA185-1 DF Ball Bearings 2.0000 in Uncoated Round 6500 RPM
3/6